Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
wallpaper Tattoo in words written in
ashkam
08-06 12:11 PM
Took me 5 days from the Texas Center.
MatsP
August 14th, 2006, 11:48 AM
I absolutely HATE it when people put nose-prints on my photos ;-) But yes, that's indeed true - and the opposite: If you don't have good light, even the most expensive lenses wouldn't make any difference - but no-one bothered to tell Steve Mitchell that ;-)
--
Mats
--
Mats
2011 girlfriend Chinese Word Tattoo
sanan
06-04 09:11 PM
What is your PD and category?
I filed my 485 in July 2004. My PD is current now, does anyone know what happens next?
Thank you.
delhis
I filed my 485 in July 2004. My PD is current now, does anyone know what happens next?
Thank you.
delhis
more...
manubilga
08-16 07:11 PM
If I got SSN Can I make Any Corporation and buy a business
hopefulgc
01-30 03:48 PM
I would certainly come back to update it... and i am sure there would be more than a few who would do the same.
After all, its a good way to put the fitting GC pain to rest.
How reliable is this Tracker(or any) data? I don't think all the registered people who gets their GC would come back and change the status of their application to 'Approved' in the Tracker. Though its better than nothing but still data is too vague to derive any real conclusion.
After all, its a good way to put the fitting GC pain to rest.
How reliable is this Tracker(or any) data? I don't think all the registered people who gets their GC would come back and change the status of their application to 'Approved' in the Tracker. Though its better than nothing but still data is too vague to derive any real conclusion.
more...
mukraw6
08-13 02:00 PM
Its been 2 weeks that I have received my receipts for 485,765,131 from NSC. Thanks
2010 word tattoo designs pictures
texcan
10-24 04:30 PM
yes, really I missed that oppurtunity by 7 days. my only question is
Can she stay here until I94 expires? or for 180 days?
Thanks
talk to a lawyer, or check forums...if you were too close in approval/marriage dates there will be some way to clear this up.
First try to get her here on H4 and then chase her GC application.
Afterall, marriage is important
Can she stay here until I94 expires? or for 180 days?
Thanks
talk to a lawyer, or check forums...if you were too close in approval/marriage dates there will be some way to clear this up.
First try to get her here on H4 and then chase her GC application.
Afterall, marriage is important
more...
Chiwere
10-13 02:24 PM
With a million GC applications processed a year even if a small percentage fit the profile Merck has managed to corner a substantial market and more than that a ready made test suite for it's vaccine.
This racket started with states like Texas making Gardasil mandatory for pubescent girls. If this is what takes to be in "Land of the Free" I would rather leave it for the true Americans who would be suing Merck 15-20 years later for damages.
This racket started with states like Texas making Gardasil mandatory for pubescent girls. If this is what takes to be in "Land of the Free" I would rather leave it for the true Americans who would be suing Merck 15-20 years later for damages.
hair word value represents
WAIT_FOR_EVER_GC
07-24 09:12 AM
xbcsd
more...
MetteBB
05-11 01:51 PM
and finally... the apples again
hot words tattoos.
Rolling_Flood
08-14 11:05 PM
dude, there's gibberish in the sheet.............is this the right link?
more...
house [Japanese Touching Word Tattoo
sundevil
07-11 02:52 PM
Now if only people can understand what he is saying:cool:
Seriously though, it might be a good force to have. Even if his immigration view are not exactly aligned, he could consider this because all the Businesses that would benefit from this, especially in CA.
Let's discuss ways to communicate with the Governor and to make him aware of our situation. I am going to do some research on his views on immigration but I think it might be good.
As Schwarzenegger has said multiple times:
"I think the most important thing to note is I am a champion of immigrants. I promote immigration. I am an immigrant myself. I think it's extremely important that we do it in a legal way."
�Polls Push Governor to the Border�, LA Times, April 30, 2005
Seriously though, it might be a good force to have. Even if his immigration view are not exactly aligned, he could consider this because all the Businesses that would benefit from this, especially in CA.
Let's discuss ways to communicate with the Governor and to make him aware of our situation. I am going to do some research on his views on immigration but I think it might be good.
As Schwarzenegger has said multiple times:
"I think the most important thing to note is I am a champion of immigrants. I promote immigration. I am an immigrant myself. I think it's extremely important that we do it in a legal way."
�Polls Push Governor to the Border�, LA Times, April 30, 2005
tattoo Cool Word Tattoo Designs
chehuan
01-17 04:26 PM
hey
i wanted to know what are the chances of a persons i40 to be denied if another with the same profile in the same team and same application is recently denied
for your information both are masters candidates and are eb2 filed
but his was file months before mine and he got audited
mine is in the process of being filed
not sure of whether this even matters and cases are indepedent
but just wanted to know ahead of time if it calls for a sure denial
thanks
chehuan
i wanted to know what are the chances of a persons i40 to be denied if another with the same profile in the same team and same application is recently denied
for your information both are masters candidates and are eb2 filed
but his was file months before mine and he got audited
mine is in the process of being filed
not sure of whether this even matters and cases are indepedent
but just wanted to know ahead of time if it calls for a sure denial
thanks
chehuan
more...
pictures one word tattoos. people have
perm2gc
08-08 07:56 PM
I spoke with the lawyer. She asked me to get an affidavit stating the arrest reason and also what happened. She will send this as soon she gets my receipt number.
I am not having any case/docket number since this happened 4 years back.
Lawyer is saying this should be ok and this falls under misdemeanor.
Any suggestion?
you are ok.try to conatct the court clerk and give them your details or goto the police station and they will give your case number or if they have online system..just search in the system
I am not having any case/docket number since this happened 4 years back.
Lawyer is saying this should be ok and this falls under misdemeanor.
Any suggestion?
you are ok.try to conatct the court clerk and give them your details or goto the police station and they will give your case number or if they have online system..just search in the system
dresses On occasion the tattoo word or
SSNN
04-16 04:13 PM
Should we wait until my PD becomes current, to try to link our aplications? Is that necessary? Is there any danger that my husband's 485 application might get lost if USCIS denies our request to link his case to mine now since my PD is not current?
Don't know if this matters, but just this week, I got a RFE for employment verification. We have now sent necessary documents as requested by the dept.
Don't know if this matters, but just this week, I got a RFE for employment verification. We have now sent necessary documents as requested by the dept.
more...
makeup These Word Tattoos can be
ras
03-17 02:45 PM
We hear a lot about good credit.. but not a very good understanding of what it means
So is a score 670 considered to be good one? How much approx.. would be mortgage/month for $300K house. Ofcourse there are many factors but just to get a ball park free..
So is a score 670 considered to be good one? How much approx.. would be mortgage/month for $300K house. Ofcourse there are many factors but just to get a ball park free..
girlfriend japanese word tattoos, kanji
sparky_jones
04-26 08:12 AM
sparky_jones: can you give us your write up to USCIS regarding this missing field information. What was in the letter regarding this field. I plan on sending a letter to them providing this information.
I attached a sheet of paper to my supporting documentation with the following heading in bold: "Correction Requested for e-Filed Form I-765
Receipt # ***-**-****"
Below that, I simply put the following statement:
"Please update Item 12 �Date of Last Entry into the US� for Form I-765 to **/**/****. This field was omitted during the e-Filing process."
I attached a sheet of paper to my supporting documentation with the following heading in bold: "Correction Requested for e-Filed Form I-765
Receipt # ***-**-****"
Below that, I simply put the following statement:
"Please update Item 12 �Date of Last Entry into the US� for Form I-765 to **/**/****. This field was omitted during the e-Filing process."
hairstyles tattoos that involve words
yetanotherguyinline
01-14 08:47 PM
For a long time, I have had this urge to be self employed but personal reasons and the immigration system was a deterrent factor for me in turning this into a reality. Now that I have an EAD, I would like to reexplore this idea and wanted to know if there are any entrepreneurial organizations that I could become a member of that will help me network with like minded people. I have heard of TiE and am getting to know more about this organization. If any of you are members, feedback on how it has helped you will help a lot of people planning to join. Are there any other clubs/orgs that help people like me can bounce ideas off of and help bring together like minded people under the same roof?
Thanks
PS: I had plans of pursuing an MBA for the sole purpose of networking. Unfortunately, this is not something I can do at this point of time.
Why dont we start an entrepreneur thread here on IV. I know it does not go in line with IV's goals, I can set up a forum real quick and we can get a group going there.
Thanks
PS: I had plans of pursuing an MBA for the sole purpose of networking. Unfortunately, this is not something I can do at this point of time.
Why dont we start an entrepreneur thread here on IV. I know it does not go in line with IV's goals, I can set up a forum real quick and we can get a group going there.
Madan Ahluwalia
02-23 02:55 PM
Two things:
1. You might benefit from 245(k) provisions. Check with your attorney.
2. Do not provide tax returns. it is not required at the time of filing of green card application.
Good luck.
1. You might benefit from 245(k) provisions. Check with your attorney.
2. Do not provide tax returns. it is not required at the time of filing of green card application.
Good luck.
hdos
06-10 05:00 PM
What if my employer does not respond at all.
What are the chances for the extension? there must be some way.
How can I buy some more time so that I can find some other way around?
What are the chances for the extension? there must be some way.
How can I buy some more time so that I can find some other way around?
Aucun commentaire:
Enregistrer un commentaire